How to configure a TLS connection between the DINSTAR SBC and the Zoom Phone system 2022-02-10

Technical Guides

How to configure a TLS connection between the DINSTAR SBC and the Zoom Phone system

  • When migrating the Zoom Phone solution, you may need a hybrid solution connecting both Zoom and your current PSTN/SIP trunk providers. With DINSTAR SBCs (SBC session controllers), you can enjoy all the benefits and features of Zoom Phone while keeping your existing service provider contracts, phone numbers, and rates with your preferred carrier.
    zoom_sbc.png
    How to configure a secure TLS connection between the DINSTAR SBC and the Zoom Phone system? There are a few steps to follow.
    1. Prerequisites
    a. To run TLS on the public side of the network, a trusted Certificate Authority (CA) is essential.
    The example described in this section is based on the GoDaddy certificate chain as the Certificate Authority (CA). To generate a Certificate Signing Request (CSR) and obtain the certificate from a supported Certificate Authority (CA), you will receive the following 3 files.
    1.1.png
    b. Trusted public root certificates by Zoom
    Currently, Zoom data centers use public DigiCert CA certificates. Therefore, to establish a TLS connection with the Zoom Phone infrastructure, download and install the following public CA certificate as a trusted root.

    cacerts.digicert.com

    cacerts.digicert.com

    cacerts.digicert.com

    The example described in this section is the download: DigiCertGlobalRootCA.crt.pem
    2.png
    c. Merge CA files
    Open the files “star_DINSTAR_com.crt”, “DigiCertCA.crt”, and “DigiCertGlobalRootCA.crt.pem” one by one with Notepad.
    Create a new txt file in Notepad.

    Copy the contents of "star_DINSTAR_com.crt", "DigiCertCA.crt" and "DigiCertGlobalRootCA.crt.pem" to the new txt file.

    Note: the content must be written in the following order.

    Save the file and rename it to “CRT_merge.crt”
    3.png
    2. To install SBC certificates
    After creating all the certificate files as indicated above, please begin installing the SBC certificate and root/intermediate certificates as follows:
    Open the page System>Certificate, click on the Add.

    Upload the SBC certificates and submit.

    The CRT file uploads the file "CRT_merge.crt"

    The KEY file uploads the file '_.DINSTAR.com.key'

    The CA file uploads the file "DigiCertCA.crt"

    4.png
    5.png
    3. SIP trunk configuration with Zoom
    a. Define the SBC network interface.

    In this scenario, the GE0 of the SBC will use a public IP and connect to Zoom's IP. Open the page System>Network, set the IP address information.

    6.png
    b. Create the trunk with Zoom.
    In this scenario, the SBC must create a SIP trunk with Zoom and use the CAs. Open the page Service>Core SIP Trunk, click "Add", create a new trunk.

    Interface and Media Interface choose ‘GE0’ as shown above. The SBC will use the GE0 communicator with Zoom.

    Transport choose ‘TLS’

    Bidirectional TLS verification must be enabled.

    PEM file choose ‘Zoom_TLS/crt_crt_merge.crt’

    KEY file choose ‘Zoom_TLS/key__.DINSTAR.com.key’

    CA file choose ‘Zoom_TLS/root_digicertca.crt’

    Remote IP: Port, enter the Zoom trunk information, e.g., 113.88.13.11:5060

    7.png
    4. Check trunk status
    Check trunk status: disable and enable the trunk
    8.png
    Open the page Overview>Primary trunk status, click on the trunk status.
    9.png